What’s Twinkly Pro Ethernet Controller Box? (Twinkly PRO)

Twinkly Pro Ethernet Controller Box (1000 LEDsx4port) Unboxing and onboarding

Applies to Twinkly Pro Ethernet Controller Box (1000 LEDsx4port)

 

Unboxing

The Twinkly PRO Ethernet controller 1o00 package contains the following items:

  • TWPRO1000ETHP Ethernet Controller 
  • AC/DC Power Adapter 
  • Ethernet Cable Gland

Twinkly Pro - Ethernet Controller _ Box 1

Unincluded raccomended setup 

  •  Twinkly Pro Light Strings (up to 4 per controller)

  • Internet Router

  • CAT5 Ethernet Cable

 Onboarding

The onboarding procedure is explained  step by step in this useful tutorial:

 

To make the Ethernet 1000 controller Ip65, you have to follow this procedure:

Materials and tools needed:

  • crimping,
  • ethernet cable,
  • ethernet cable gland.

Step by step procedure:

  1. Use the crimping tool to cut one end of the ethernet cable
  2. Cut the end of the cable
  3. Insert the Ethernet cable gland provided in this package
  4. Remove the sheath
  5. The wires are grouped two by two
  6. Unroll the groups of wires till you have 8 single wires
  7. Sort the wires in the order indicated by the graphic in the image above:
    image-Oct-04-2021-09-59-54-02-AM
  8. Flatten the wires, the connector must have the clip at the bottom and the seath must touch the edge
  9. Insert the connector in the crimping tool and crimp to hold the wires in place
  10. Insert the connector in the ethernet cable gland
  11. The cable is ready to be connected to the controller

 


Not found what you were looking for? Contact us.